Description
ASAP® LOCK
Mobile fall arrester with locking function
The ASAP LOCK mobile fall arrester is designed to facilitate handling during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the fall arrester locks on the rope and stops the user. The integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. The connection arm makes the system drop-resistant when passing intermediate anchors. The ASAP LOCK is used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber to work at a distance from the rope.
- Constant fall protection:
- arrests falls, slides, and uncontrolled descents
- works on vertical or angled rope
- locks on the rope even if grabbed during the fall
- Integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. In the event of a strong wind, this function also prevents the rope from being blown upward
- Simple to use, and effective:
- moves up or down the rope, without any manual operation
- easy to install and remove at any point on the rope
- connection arm makes the system drop-resistant when passing intermediate anchors
- used with an energy absorber to work at a distance from the rope: ASAP’SORBER or ASAP’SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situations
Specifications
- Material(s): aluminum, stainless steel, nylon
- Weight: 425 g
- Certification(s): CE EN 12841 type A when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, and a 10-13 mm EN 1891 type A rope
- Certification(s): CE EN 353-2, GB/T 24537-2009 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber and an AXIS 11 mm rope with sewn termination or ASAP AXIS 11 mm or PARALLEL 10.5 mm with sewn termination
- Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 11 mm static rope with sewn termination
- Certification(s): EAC when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, and a 10-13 mm EN 1891 type A rope
- Certification(s): UKCA, XF 494-2004: FZL-Z-Q10/13
References
| References | B071BA00 |
|---|---|
| Guarantee | 3 years |
| Inner Pack Count | 1 |
Technical notice
Declaration Of Conformit
ASAP’SORBER AXESS
Energy absorber for ASAP or ASAP LOCK for a maximum load of 250 kg
The ASAP’SORBER AXESS energy absorber may only be used with the ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. In can be used in two-person rescue situations for a maximum load of 250 kg.
- May only be used with an ASAP or ASAP LOCK mobile fall arrester
- Allows the user to keep the rope at a distance in order to:
- free up the work area
- protect the rope from sharp tools and harmful contact points
- Absorbs energy in case of a fall:
- tearing of the energy absorber webbing limits the impact force on the user
- designed for users who weigh between 50 and 130 kg Can be used for loads of up to 250 kg in two-person rescue situations
- durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber
- Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion
Specifications
- Material(s): nylon, polyester
- Certification(s): CE EN 355, ANSI Z359.13 6 feet
References
| References | L071CB00 |
|---|---|
| Length | 40 cm |
| Weight | 205 g |
| Guarantee | 3 years |
| Inner Pack Count | 1 |
Technical notice
Declaration Of Conformit